how to connect to wifi using qr code ubiquiti

3 min read 24-01-2025

how to connect to wifi using qr code ubiquiti

Connecting to a Wi-Fi network using a QR code is quick and easy, especially with Ubiquiti's UniFi system. This method eliminates the need to manually type in the network name and password, reducing the chance of errors. This guide will walk you through the process of connecting to a Ubiquiti Wi-Fi network using its QR code. Whether you're using an Android or iOS device, the process is largely the same.

Understanding Ubiquiti QR Codes

Ubiquiti access points (APs) and other network devices often generate QR codes containing the SSID (network name) and password for your Wi-Fi network. This simplifies the connection process for both guests and regular users. These codes usually display on the device's interface (e.g., a web portal) or on a sticker attached to the hardware itself.

Connecting to Ubiquiti Wi-Fi via QR Code: Step-by-Step Guide

The specific steps might vary slightly depending on your device's operating system and the version of your device's software. However, the general process remains consistent.

Step 1: Locate the QR Code

First, find the QR code for your Ubiquiti Wi-Fi network. It might be:

On a sticker: Look for a sticker on your Ubiquiti access point.
On the UniFi Network Controller: If you're managing your network through the UniFi Network Controller software (web interface or app), you should be able to find the QR code there for each network you've configured.
On a printed document: The QR code may be printed on a setup guide that came with your Ubiquiti device.

Step 2: Open Your Device's Camera App

On your smartphone or tablet (Android or iOS), open the built-in camera application.

Step 3: Scan the QR Code

Point your device's camera at the QR code. Most modern smartphones will automatically detect and scan the code. You might see a notification or pop-up appear on your screen. If it doesn't automatically scan, use your camera app's built-in scan function (often a square or QR code icon).

Step 4: Select the Wi-Fi Network

After scanning the code, your device will likely display a notification or prompt. This typically includes:

The network SSID (Wi-Fi name)
The option to connect to the network.

Tap the "Connect" button or similar option. Your device will then automatically connect to the Ubiquiti Wi-Fi network using the credentials embedded in the QR code.

Step 5: Verify the Connection

Once connected, check if you have internet access by opening a web browser and visiting a website.

Troubleshooting Common Issues

QR code not scanning: Ensure the QR code is clean and well-lit. Try using a different QR code scanner app if necessary.
Connection failure: Check if your Ubiquiti access point is properly powered on and connected to the internet. Also, verify that the network is correctly configured on the UniFi Network Controller. Restarting both your device and the AP might help.
QR code not found: Consult your Ubiquiti device’s manual or check the UniFi Network Controller for the QR code.

Using QR Codes for Guest Networks

Ubiquiti's UniFi system makes managing guest networks straightforward. You can generate separate QR codes for your guest network, providing secure and easily accessible Wi-Fi to your visitors while keeping your main network's credentials protected. This helps maintain network security and prevents unauthorized access.

Conclusion

Connecting to Ubiquiti Wi-Fi using a QR code is a convenient and efficient method. By following these steps, you can quickly and easily connect your devices to your Ubiquiti network without manually entering complex passwords. Remember to always check the network's security settings, especially for guest networks, to ensure the safety of your data.