how to clean lookah seahorse pro plus

2 min read 21-01-2025

The Lookah Seahorse Pro Plus is a popular and powerful dab rig, but keeping it clean is crucial for optimal performance and hygiene. Regular cleaning prevents resin buildup, maintains flavor, and ensures your device functions properly. This guide provides a comprehensive, step-by-step method to clean your Seahorse Pro Plus effectively.

What You'll Need

Before we begin, gather these essential cleaning supplies:

Isopropyl alcohol (99%): The higher the percentage, the better it will dissolve resin.
Salt (coarse): Helps scrub away stubborn residue.
Cotton swabs: For detailed cleaning of hard-to-reach areas.
Paper towels or microfiber cloth: For wiping and drying.
Small container: To soak the components.
Warm water: For rinsing.
Optional: Concentrate cleaner: For particularly stubborn residue (follow manufacturer's instructions).

Step-by-Step Cleaning Process

1. Disassembly:

Carefully unscrew and separate all detachable parts of your Lookah Seahorse Pro Plus. This usually includes the mouthpiece, atomizer, and any other removable components. Refer to your device's manual if needed.

2. Initial Cleaning (Dry):

Use a dry cotton swab or paper towel to remove any loose debris or residue from the inside of each component. This pre-cleaning step makes the next phase much easier.

3. Alcohol Soak:

Fill your small container with isopropyl alcohol (99%).
Add a generous amount of coarse salt to the container. The salt acts as an abrasive to help break down the resin.
Submerge the removable components in the alcohol and salt mixture. Ensure all parts are fully immersed.
Let them soak for at least 30 minutes, or longer for particularly stubborn residue. You can gently swirl the container occasionally.

4. Scrubbing:

After soaking, remove the components from the alcohol and salt solution.
Use cotton swabs to carefully scrub away any remaining resin buildup. Pay close attention to crevices and hard-to-reach areas. For the atomizer, use a small brush or pipe cleaner if necessary.

5. Rinsing:

Rinse all components thoroughly with warm water to remove any remaining alcohol and salt residue.
Ensure all parts are completely clean and free from any residue.

6. Drying:

Allow all components to air dry completely before reassembling. Avoid using heat to dry, as this can damage the device. A soft, clean cloth can help speed the drying process.

7. Reassembly:

Once all parts are completely dry, carefully reassemble your Lookah Seahorse Pro Plus. Ensure all connections are secure.

Cleaning the Battery and Charging Port

The battery and charging port require separate cleaning. Never submerge the battery or charging port in liquids. Use a slightly damp cotton swab to gently clean these areas. Allow them to completely dry before use.

Maintaining Your Seahorse Pro Plus

Regular cleaning is key. Clean your device after each use to prevent resin buildup. This will prolong its lifespan and maintain its performance.

Troubleshooting Stubborn Residue

If you encounter particularly stubborn resin, consider using a dedicated concentrate cleaner. Follow the cleaner's instructions carefully and ensure proper ventilation.

Additional Tips

Always use 99% isopropyl alcohol for the most effective cleaning.
Avoid using harsh chemicals or abrasive materials that could damage your device.
Refer to your device's manual for specific cleaning recommendations.

By following these steps, you can keep your Lookah Seahorse Pro Plus clean and functioning optimally for many uses to come. Remember, regular maintenance is key to preserving your device's performance and hygiene.