how to clean bissell revolution

Daniel Parker

2 min read

·

18-01-2025

1

0

Share

The Bissell Revolution Pet Pro is a powerful cleaning machine. Keeping it clean ensures optimal performance and longevity. This guide will walk you through a complete cleaning process, from emptying the dirt tank to deep cleaning the brush roll. Regular maintenance will keep your Bissell Revolution performing at its peak, tackling pet messes and everyday dirt with ease.

Emptying the Dirt Tank and Dustbin

This is the most frequent cleaning task. You'll want to empty these after each use, or when they get close to full.

Steps:

1. Turn off and unplug: Safety first! Always disconnect the power before cleaning.
2. Detach the dirt tank: Locate the release button or latch and carefully remove the tank.
3. Empty the contents: Dispose of the dirt and debris in a trash can.
4. Rinse the tank: Rinse the tank with warm water, ensuring to remove any remaining debris or pet hair. Let it air dry completely before reattaching.
5. Empty the dustbin (if applicable): Some models have separate dustbins; empty and clean these as well.

Cleaning the Filter

A clean filter is essential for maintaining suction. The frequency depends on your usage, but aim for at least once a month.

Steps:

1. Locate the filter: Your filter's location varies by model. Consult your user manual for specifics.
2. Remove and tap: Gently remove the filter and tap it against a trash can to remove loose dirt.
3. Rinse (if washable): Some filters are washable; others are disposable. Check your manual. If washable, rinse gently with cool water and let air dry completely before replacing. Never use soap.
4. Replace: Once dry, replace the filter in its designated slot.

Cleaning the Brush Roll

The brush roll is prone to hair and debris buildup, impacting cleaning effectiveness.

Steps:

1. Turn off and unplug: Again, safety is paramount.
2. Access the brush roll: Consult your manual. This usually involves removing a bottom cover or releasing a latch.
3. Remove the brush roll: Carefully remove the brush roll, avoiding touching the spinning brushes.
4. Cut away hair and debris: Use scissors to carefully cut away any tangled hair or debris.
5. Clean the brush roll: Use a brush or cloth to remove any remaining dirt.
6. Clean the brush roll housing: Wipe down the housing area, removing any collected debris.
7. Reassemble: Carefully replace the brush roll and reattach any removed covers.

Deep Cleaning the Bissell Revolution

For a thorough cleaning, you might need to do this every 3-6 months depending on how frequently you use it.

Steps:

1. Clean all the above: Empty the dirt tank, clean the filters, and clean the brush roll.
2. Wipe down exterior: Use a damp cloth to wipe down the exterior of the machine, paying attention to the vents and any crevices.
3. Check hoses and attachments: Inspect all hoses and attachments for clogs or damage. Clean any debris found.

Troubleshooting Common Issues

• Weak suction: Check for clogged filters, a full dirt tank, or a tangled brush roll.
• Noisy operation: This could be due to a tangled brush roll or debris build-up.
• Machine won't turn on: Check the power cord and ensure the machine is properly plugged in.

Maintaining Your Bissell Revolution

Following these simple steps will keep your Bissell Revolution Pet Pro running smoothly and effectively. Regularly emptying the dirt tank, cleaning the filter, and maintaining the brush roll will ensure it continues to provide a deep clean for years to come. Always refer to your user manual for specific instructions related to your model. Remember, preventative maintenance is key to prolonging the life of your vacuum.