how to fill vaporesso xros 3ml pod side fill

Daniel Parker

2 min read

·

12-01-2025

1

0

Share

The Vaporesso XROS is a popular pod system known for its ease of use and satisfying vaping experience. One of its key features is the convenient side-fill system for its 3ml pods. This guide will walk you through the process of refilling your XROS pod quickly and efficiently, minimizing mess and maximizing your vaping enjoyment.

Identifying Your XROS Pod

Before we begin, ensure you're using the correct pod. The XROS uses 3ml pods with a distinct side filling mechanism. Make sure your pod is the appropriate one for your device.

Step-by-Step Guide to Filling Your Vaporesso XROS 3ml Pod

Here's a simple, step-by-step guide to filling your Vaporesso XROS 3ml pod:

1. Preparation:

• Gather your supplies: You'll need your XROS pod and your preferred e-liquid.
• Inspect the pod: Check the pod's fill level. Don't overfill.

2. Locating the Fill Port:

• Side Fill Port: The XROS 3ml pod features a small, usually rubberized, side-fill port. It's typically located on the side of the pod, near the bottom. Look closely—it's small!

3. Opening the Fill Port:

• Push and slide: Gently push the rubber stopper on the side of the pod to one side. This will reveal the filling port. Don't force it!

4. Filling the Pod:

• Use a narrow-tipped bottle: Use a bottle with a narrow tip to precisely fill the pod. This minimizes the risk of spills and leaks.
• Fill slowly: Slowly add e-liquid to the pod, avoiding overfilling. Aim to leave a small gap at the top to prevent leaking. The pod's capacity is 3ml; fill it to just below the maximum line.
• Avoid air bubbles: Try to avoid introducing air bubbles into the pod. Gentle filling helps with this.

5. Closing the Fill Port:

• Replace the stopper: Once filled, gently slide the rubber stopper back into place, ensuring a tight seal.

6. Priming the Coil:

• Before vaping: Before vaping, allow a few minutes for the e-liquid to saturate the coil. This prevents dry hits. Some vapers prefer to gently swirl the pod to help distribute the e-liquid.

7. Attach and Vape:

• Reattach the pod: Securely attach the filled pod to your XROS device.
• Enjoy: Enjoy your vaping experience!

Troubleshooting Common Issues

• Leaking: If you experience leaking, ensure the fill port is properly sealed and you haven't overfilled the pod. Also, avoid tilting the device excessively.
• Dry Hits: If you get dry hits (a harsh, burnt taste), make sure you've allowed sufficient time for the coil to be saturated with e-liquid.
• Gurgling: Gurgling sounds usually indicate that the e-liquid has flooded the coil. Try vaping at a lower wattage or allowing more time for the coil to fully saturate.

Maintaining Your Vaporesso XROS Pod

Regular cleaning and proper storage will extend the lifespan of your XROS pod. Avoid dropping it and storing it in a cool, dry place, away from direct sunlight and extreme temperatures.

By following these simple steps, you can easily refill your Vaporesso XROS 3ml pod and enjoy a consistent, satisfying vaping experience. Remember to always vape responsibly.